Foam body with a bristle band for scraping heavier scale and buildup.

Soft 1–2 lb/ft³ foam swabs for drying, gauging, dust removal, and light cleaning.

Medium- and heavy-density polyurethane foam pigs for moderate to heavy cleaning.

The standard cleaning pig in the foam category, in light, medium, and heavy densities.

Ribbed foam pig, also called a sandwich or pancake pig, for cleaning, filling, and dewatering.

Foam pigs with nylon or plastic bristles for plastic and coated pipelines.

Coated brush or wire foam pigs that remove rust and stubborn deposits.

Among the most aggressive cleaning pigs, fully covered in brush straps.

Studded heavy-density foam pigs for extremely hard deposits and decoking.

Foam pigs rolled in silicon carbide grit to abrade hard deposits.

Foam spheres for lines with sharp bends or restrictions that other pigs cannot navigate.

Custom foam pigs built in-house for dual-diameter lines, low-pressure runs, and pulling.

Three-cup solid cast urethane pig with an exceptionally long service life.

One cup and several discs, for coating operations and moderate cleaning.

Thicker, more robust discs for heavy-duty cleaning, with long service life and effective sealing.

Combines the high sealing of the three-cup UFCP with robust cleaning discs.

Solid cast cup, disc, and combo pigs fitted with brushes for cleaning.

Solid-cast urethane pigs for food and beverage and multi-product processing lines.

Custom OD and length pigs for launching and receiving through specialized pigging valves.

Pigs built to negotiate lines that change diameter, in sizes 3 in x 4 in and larger.

Solid-cast and inflatable urethane spheres, used for meter proving and condensate removal.

Solid-cast polyurethane pigs with custom brushes, transmitters, magnets, and durometers.

Solid-cast polyurethane conical cups for steel pigs, in sizes from 2 in to 48 in.

Solid-cast polyurethane discs for steel pigs.

Among the most aggressive cleaning pigs, in many configurations and customizable for very long runs.

Carbon steel batching pigs with replaceable polyurethane cups for filling, dewatering, and product removal.

Steel cup pigs with circular or block brushes on wear-compensating springs for pre-commission and on-stream cleaning.

High-sealing, flexible unidirectional pigs that pass diameter changes and dents of up to 25%.

Conical cup pigs with spring-loaded steel brushes for 360° cleaning coverage.

Bidirectional scraping disc pigs for heavy-duty cleaning, batching, or gauging.

Bidirectional pig with four sealing discs and two guide discs, widely used offshore.

Multi-disc pig with optional spring-loaded brushes for added cleaning and centering.

Replacement cups, discs, brushes, and gauging plates for our pigs and other manufacturers' pigs.

Steel pigs built in-house in nearly any configuration of cups, discs, brushes, and magnets.

Aluminum plates sized close to the pipeline's internal diameter to check pipe geometry.

Flags when a pig passes a trap or valve, mechanically or electronically.

Pig-tracking equipment for rent or purchase, including transmitters, receivers, and geophones.

Capture dust and debris from open-ended pipelines during pigging operations.

Aluminum poles for removing pigs from launchers and receivers.

Affordable rental launchers and receivers for cleaning operations, plus dedicated water-industry units.

Doors for launchers and receivers, from threaded to quick-opening styles.